Product application
3 easy steps

The handling differs slightly depending on whether the single-use emcools Flex. Pad™ or the multiple-use emcools Cryo-Pad is used.

 

EMCOOLS FLEX.PAD™

1. Preparation

  • Remove transportation box
  • Freeze Flex.Pad™ inside for 12-48 hours (set-up time depends on the freezing temperature)

2. Operational Readiness

  • Ready to use pads are indicated by a blue color indicator label
  • • If the pad is too cold for safe application the color indicator is black – wait a short while until the color indicator turns blue, only then open the plastic sleeve

3. Application

  • Open packaging, take out ready to use Flex.Pad™ (=blue color indicator)
  • Peel protective foil and press down the pad for 3-5 seconds directly on the patient’s skin
Flex.Pad product label

EMCOOLS CRYO.PAD

1. Preparation

  • Remove transportation box
  • Freeze Pads in the freezer at -8°C to -11°C
  • Preparation time between 12 and 48 hours depending on the capacity of the freezer

2. Operational Readiness

  • At lower temperatures than -11°C, the emcools Cryo.Pad must rest for at least 5 minutes at room temperature prior to application
  • Make the pad structure flexible by gently flexing

3. Application

  • Open the packaging, remove clothing from the body area, place the pad on the skin and fix as appropriate
  • Remove the pad at the latest when completely melted
  • Further pads can be applied until the therapy is finished

4. Cleaning – Treatment

  • Clean immediately after use with warm water and a mild (ph-neutral) soap solution (up to 50 cleaning cycles)
  • Dry with a soft cloth
Cryo.Pad Product Label